江苏安迪盛环境科技有限公司
安迪盛—任意湿度控制

专注湿度控制,根据您的需求量身打造

13961730412 13921282988

新闻资讯

当前位置:首页 > 新闻资讯 > 行业资讯

转轮除湿机在启动时需要做什么检查?

发布日期:2018-10 点击量:1408

转轮除湿机在启动时需要注意做好哪些检查工作呢?下面的内容我们就来告诉您。

确保除湿设备接通电源,机组处于待机状态时,设备控制箱上的电源指示灯应亮。设备安装有自动控制,请将设备选择就地操作模式。

接通电源,电源指示灯亮。

点动电动机,检查风机转向是否正确,若有误即停机将相线调换,致风机正向。当点动时各部位应无异常现象和摩擦声后方可投入试运转3~5分钟,停机。无异常再次试运转,以钳形表测量风机、电机的起动电流,运行电流是否正常。

检查再生风机及处理风机的旋转方向是否正确,正确的旋转方向应该与风机机壳上所标的箭头方向一致。

检查转轮的旋转方向是否正确,正确的旋转方向应该与转轮箱体上所标的箭头方向一致。

检查所有设备启、停和联锁装置工作的可靠性。

英文版:

What inspection work should be done when the rotary dehumidifier starts? Let's tell you the following.

Ensure that the dehumidifier is connected to the power supply. When the unit is in standby state, the power indicator on the equipment control box should be on. Equipment installation has automatic control. Please select the local operation mode.

Turn on the power and the power indicator light is on.

Spot the motor to check whether the fan is steering correctly. If there is a mistake, stop the machine and change the phase line, causing the fan to be positive. When there is no abnormal phenomenon and frictional sound, all parts should be put into trial operation for 3~5 minutes before stopping. No abnormal test run again, with the clamp meter to measure the fan, motor starting current, running current is normal.

Check that the rotation direction of regenerative fan and treatment fan is correct. The correct rotation direction should be the same as the arrow direction marked on the fan housing.

Check that the rotation direction of the runner is correct. The correct rotation direction should be the same as the arrow direction on the runner box.

Check the reliability of all equipment startup, shutdown and interlocking devices.

想了解更多关于转轮除湿机,转轮除湿机厂家,转轮除湿机品牌的相关信息,请持续关注江苏安迪盛环境科技有限公司官网www.jsadskj.com